Technical details about 200-021 15M

225° White, Masthead w/anchor, K-lock PE base w/15 meter cable. INTENDED FOR USE ON POWER BOATS.

No image
  • LED (Light Emitting Diode) navigation light.
  • Unique and precise definition of light angles.
  • Rugged and unbreakable: Precision machined anodised aluminium housing protects the LED’s and electronics.
  • Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin.
  • Waterproof to IP 68+ (submersible).
  • Low power consumption – 70 to 90% less than traditional navigation lights.
  • Full brightness with input voltages ranging from 10 to 32 Volts.
  • All Lopolights have been tested several times during production, a total of more than 24 hours.
  • Easy to install, adaptor and screws included (when applicable).

Approvals
Worldwide typeapproval (please refer to certificates on Lopolight.com)
Included in package
1 Navigation light pre-cabled with 0,7 meter shielded marine grade cable, 1 K-Lock PE mounting base, Installation guide
Measurements
Please see drawing
Materials
Silver anodized aluminum, PMMA lens, A4 stainless steel screws, Epoxy, Polyurethane.
Supply voltage
10 - 32 VDC
Power consumption
2.64 Watt; Current @ 12 VDC: 0,22 A: Current @ 24 VDC: 0,11 A
Light colors
White
Intensity
Masthead section: >12 Cd, Stern section: >12 Cd, Anchor: >12 Cd
Visibility (@K=0.8)
Masthead: >3 nmAnchor: > 3 nm,
Number of LED's
64
Suggested feed cables
12 VDC: 2 x 0,5 mm2 (maximum outer diameter 7mm); 24 VDC: 2 x 0,5 mm2 (maximum outer diameter 7mm)
Expected life
Vessel size
12 - 20 meter (39,4 -65,6 feet)
Mounting
Horizontal